Now, we're adding a UPS by APC, a BR1500G-GR ( ) which comes with PowerChute Personal Edition and a special Rj45-USB cable: they enable the UPS to Hibernate the server when unattended in case of low battery during a blackout.įrom the server I can see in real time the UPS' state, battery % and so on. We have a Prolian M元30 G6 Server (p/n: 637080-421) with WIndows 2008 R2 operating system.
The Mainboard is changed from the HP Technical Support for the second time. PCI Bus 07:41 PCI Bus Error (Slot 0, Bus 0, Device 0, Function 0) System Firmware will log additional details in a separate IML entry if possible System Error 07:41 Unrecoverable System Error (NMI) has occurred. PCI Bus 07:41 Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 0, Function 0, Error status 0x00000000) PCI Bus 07:41 Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 28, Function 4, Error status 0x00000000) In the ILO Management Log there are this entrys : When we restart the Server then first the "Rebooting" from W2016 Server is shown for 10 minutes, after this the Bluescreen appears with : DRIVER POWER STATE FAILURE Service Pack iso 06-2018 is allready installed.
Driver power state failure windows 10 bios drivers#
The Server is set in BIOS to maximum Performance Mode.Īll Drivers and Firmware are Up to Date. Inserted are 2 x H221, 2x H241 Cards on which is an Netapp E-Series Storage and 4 x LTO7 Tape Drives in an MSL 4048 connected.Īll Engery Save Settings are turned to off. We have the following Problem on an HP D元80 Gen9 Server.